User's Manual

Agency Approvals: See user’s guide instructions for handling, charging, and

replacing batteries. Failure to follow those instructions can result in personal

injury, fire, or battery explosion.

Industry Canada Compliance

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations. This device requires a radio license unless it is used totally inside a building.

(The user must obtain this license.)

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada. Cet appareil exige une license radio à moins d’être entièrement installé dans

un bâtiment. (L’utilisateur doit obtenir cette license.)

For Users Outside of the United States and Canada

Place this supplement in your manual.

For the Configuration Without the Radio

European Union Compliance

This product complies with EN 55022, EN 55024, and EN 60950 as required by the

EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage

Directive 73/23/EEC as amended by 93/68/EEC.

Additional EMI/RFI Compliances

This device meets the Class B limit requirements of CISPR 22.

This device complies with the Australian EMC Framework as required by AS/NZS 3548.

Note: This product complies with the emission limits of FCC Part 15 Class B as well as

CISPR 22 Class B, as mentioned above. However, the user should be aware that when this

product is used with some accessories, it may only be compliant with Class A limits of

both standards.

For Bluetooth Provided Module by Socket Communications Configuration

The Intermec product you purchased transmits and receives data using a 2.4 GHz Frequency

Hopping Spread Spectrum system.

Programming and configuration information for the transceivers is also provided in the host device

documentation. Please check the Intermec Web site for additional documentation at

www.intermec.com.

Hereby, Intermec Technologies Corporation declares that this Bluetooth module is in compliance

with the essential requirements and other relevant provisions of R&TTE Directive (1999/5/EC).

This product has been assessed to the following standards:

• ETSI EN 300 328-2 v1.2.1 (2001-12)

• ETSI EN 301 489-17 v1.1.1 (2001-09)

• EN 60950:1992 (incl. Amdt. 1-4, 11)