User's Manual

Chapter 2 — Configuring the CK30
40 CK30 Handheld Computer User’s Manual
Bluetooth Parameter Descriptions (continued)
Parameter Description
Discoverable Makes your CK30 discoverable on the
network.
Connectable Makes your CK30 connectable on the
network.
Class of Device Determines how the device appears to other
devices during discovery.
For more information about using Bluetooth
communications, see the Wireless Printing Development Guide
available on the Intermec Developer’s Library CD.
Configuring Security on the CK30
The CK30 uses the Wired Equivalent Privacy (WEP) protocol
to provide your wireless networks the same level of protection as
a comparable wired network. WEP adds security to wireless local
area networks (WLANs) based on the 802.11b standard. You
can enable or disable WEP security.
To use 802.11 security, you need:
• An Intermec MobileLAN access point with an 802.11b radio
and software release 1.80 or later.
• A CK30 handheld computer with an 802.11b radio and the
wireless security option.
To enable WEP security on the CK30
1 Make sure you have configured the communications and
radio parameters on your CK30.
2 Open the Configuration Utility. For help, see “Configuring
the CK30 With the Configuration Utility” earlier in this
chapter.
3 Enable WEP Encryption.
4 Set the value of each of the four WEP keys.