User's Manual

Chapter 2 — Configuring the CK30
CK30 Handheld Computer User’s Manual 39
Configuring the CK30 for Bluetooth

Wireless Printing
You can send information to printers wirelessly using the
Bluetooth qualified module by Socket Communications. The
Bluetooth technology uses short-range radio links and allows for
communications over a ten-meter range.
To configure the CK30 for wireless printing
1 Go to Configuration Utility > Communications >
Bluetooth.
2 Select Set Wireless Printer to start the Bluetooth device
discovery. A list of discovered devices appears in the Devices
dialog box.
3 Select the device you want to use from the list and press
Enter.
If devices are discovered, but your device is not displayed,
make sure your device and radio are turned on and try device
discovery again.
Use this table to understand the parameters you see in the
Bluetooth menu.
Parameter Description
Remote Device Name Name of the remote Bluetooth compatible
printer.
Remote Device Address The network address of the Bluetooth
compatible printer.
Set Wireless Printer Discovers Bluetooth compatible devices.
Device Name The name assigned to your CK30.
Device Address The network address of your CK30.