User's Manual

Chapter 2 — Configuring the CK30
38 CK30 Handheld Computer User’s Manual
Using Ethernet Communications on the CK30
You can use the CK30 directly in an Ethernet network if you
have ordered Ethernet on your CK30 and you insert it into an
AD1 or AD2 communications dock. The communications dock
has an Ethernet connector that makes it possible for the CK30
to connect to your Ethernet network.
File server
Host
Terminals
PC
243X hardwired to PC
Ethernet
To use the CK30 in an Ethernet network
1 Either enable DHCP or configure these network parameters
on each CK30 in the network:
• IP Address
• Subnet Mask
• Default Router
2 If required for your network, set these parameters on each
CK30 in the network:
• Primary and Secondary DNS Servers
• Primary and Secondary WINS Servers