User's Manual

Chapter 2 — Configuring the CK30
36 CK30 Handheld Computer User’s Manual
• IP Settings (if not using DHCP)
• Network Port
2 Configure the security.
The easiest way to configure the network parameters on the
CK30 is to use the Configuration Utility. For help, see
“Configuring the CK30 With the Configuration Utility” on
page 28.
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the CK30 communicates with a host
computer through the DCS 30X or the G4000.
Ethernet
UDP Plus
CK30s
Host
Access point
G4000