User's Manual

Chapter 2 — Configuring the CK30
CK30 Handheld Computer User’s Manual 35
Configuring the Network Parameters for a TCP/IP Network
In a TCP/IP network, the CK30 communicates with a host
computer directly using TCP/IP for the RF protocol. The access
point acts as a bridge to allow communications between the
wired network and the RF network.
Ethernet
TCP/IP
Direct Connect
CK30s
Host
Access point
To use RF communications in a TCP/IP network
1 Configure these network parameters on each CK30 in the
network:
• Network Name (SSID)
• Host IP Address