User's Manual

Chapter 2 — Configuring the CK30
28 CK30 Handheld Computer User’s Manual
Configuring the CK30 With the Configuration Utility
Use the menu-driven Configuration Utility to configure the
CK30 and view system information. You can access the
Configuration Utility while running any application.
Opening the Configuration Utility
When using the Configuration Utility, you may not see a
parameter until you enable or disable a value for another key
field. For example, you will not see IP Settings unless you disable
DHCP. You may also not see a parameter if your computer does
not support a particular feature.
To open the Configuration Utility
1 From the CK30 splash screen, press Green key, Orange key.
2 In the password dialog box, type
intermec and press Enter.
The System Main Menu appears.
An icon ( ) appears in the status bar showing that you are in
the password-protected area of the CK30.
3 Select the Configuration Utility. The Configuration Utility
main menu appears.