User's Manual

Chapter 1 — Using the CK30 Handheld Computer
CK30 Handheld Computer User’s Manual 23
2 Insert the scanner 10-pin connector until it locks in place.
To scanner
Scanner port
Using the SD Card
You can use an SD card to increase file storage and install
software. The CK30 supports the following type of SD card:
• SanDisk SD cards supporting 1-bit mode only
The SD card slot is located on the top of the CK30 just above
the laser scanner window. The SD card will appear in the File
Manager as "SDMMC Disk."
To insert an SD card
1 Press Power to turn on the CK30.
2 Remove the two screws on the SD card slot cover and remove
the cover.
SD card
Cover
Screw
(2 places)