User's Manual

Chapter 1 — Using the CK30 Handheld Computer
22 CK30 Handheld Computer User’s Manual
When the CK30 successfully reads a bar code label, you will
hear a high beep and the green Good Read LED turns on
briefly.
4 Release the Scan button.
Attaching a Tethered Scanner
You can use a tethered scanner with the CK30 if you ordered it
with a 10-pin tethered scanner port in place of the integrated
scanner. The following devices are currently supported by the
CK30:
• Decoded scanners: 1470B, 1551E, 1553, 1555, 1800-series
laser scanners
• Undecoded scanners: 1550C, 128X wands
An auto-detection wizard automatically detects the presence of a
scanner connected to the 10-pin scanner port. If the scanner is
not auto-detected, an optional wizard allows you to identify
scanner types that cannot be auto-detected by the CK30.
To attach a tethered scanner
1 Locate and remove the scanner port cover.
Scanner
port cover