User's Manual

Chapter 1 — Using the CK30 Handheld Computer
CK30 Handheld Computer User’s Manual 5
The lithium-ion battery pack that is used in this device may
present a fire or chemical burn hazard if it is mistreated. Do
not disassemble it, heat it above 100° C (212° F) or
incinerate it.
Avertissement: Le paquet de piles d’ions de lithium qui est
utilisé dans cet appareil peut presenter un risque feu ou un
risque chimique de brûlure s’il est maltraité. Il ne faut pas le
désassembler, le réchauffer à une température plus élevée que
100° C (212° F) ou l’incinérer.
Dispose of used battery packs promptly. Keep away from
children. Contact your local Intermec sales representative for
replacement batteries.
Several factors determine the life of your battery such as extreme
temperatures, input devices, and your usage. For example, if you
use a tethered scanner every day, you will need to replace your
battery more often than someone who uses an internal scanner.
Maximizing Battery Life
To prolong the life of your battery, follow these guidelines.
When You Want To: Do This to Save Battery Power:
Operate the CK30 and
the Low Battery status
icon appears or the
Battery light comes on.
1 Press Power to turn off the CK30.
2 Remove the battery and insert another fully
charged battery within 10 minutes or you may
lose data.
Or, you can insert the CK30 into a powered
AC1, AC2, AD1, or AD2.
Stop using the CK30
for 5 minutes or longer.
1 Make sure the Low Battery icon is not on the
screen and that the Battery light is not turned
on.
2 Press Power to turn of f the CK30.
Store the CK30 for
more than a day.
1 Save your data and end your computer session.
2 Press Power to turn off the CK30.
3 Insert a fully charged battery.