User's Manual

Control Code Definitions
Chapter
—
5
74
6820 Series 80-Column Printer User’s Manual
Cancel Double-Wide (expanded) Print (one-line-only)
Double-Wide (expanded) print mode is canceled for the current line only.
Modes set previously return on subsequent lines. However, it does not
cancel expanded mode set by Select Double-Wide (expanded) Mode,ESC
“W” (1) or Master Select, ESC “!”. Note that this function is not supported in
DBCS.
Format
Decimal Hex ASCII
27 20 1B 14 ESC DC4
20 14 DC4
Select Double-Wide (expanded) Mode
Expanded print mode is enabled, until Cancel Expanded Print is encoun-
tered. Factory default disables double -wide mode. Note that this function is
not supported in DBCS.
Format
Decimal Hex ASCII
27 87 1* 1B 57 01* ESC “W” 1*
Cancel Double-Wide (expanded) Mode
Double-wide print mode (previously set by Select Double-Wide Mode)is
canceled. Note that this function is not supported in DBCS.
Format
Decimal Hex ASCII
27 87 0* 1B 57 00* ESC “W” 0
Select Elite Pitch
A character pitch of 1 2 cpi (characters per inch) is selected. This also can-
cels Pica Pitch (factory default = Pica). Note that this function is not sup-
ported in DBCS.
Format
Decimal Hex ASCII
27 77 1B 4D ESC “M”
Select Emphasized Mode
Emphasized printing is enabled, until Cancel Emphasized Mode is encoun-
tered. The text is made bolder by printing each dot twice, with the second
dot slightly to the right of the first dot. Factory default disables Empha-
sized mode. Note that this function is not supported in DBCS.
Format
Decimal Hex ASCII
27 69 1B 4B ESC “E”