User's Manual

Using the 6820 Printer Configuration Utility

—

Chapter

6820 Series 80-Column Printer User’s Manual

Click Update Printer to update the fonts in the printer with those in

the Fonts Selected for Update list. The Update progress: bar indicates

the progress as the control program or fonts are written to the printer.

S The Include program control update box determines whether to in-

clude the printer control program when updating the printer. Check

this box to update the setting and include the control program the next

time you update the printer configuration.

Generally, you only need to update the control program as new versions

become available. The control program is named NPFL6820.MOD.

Default Printer Settings

The f ollowing settings are the d efaults for your 6820 Printer:

Zero Print Option Print zeros without a slash

Autofeed Configuration CR (carriage return at end of line without line feed)

Protocol NPCP

Parity N/A (for NPCP)

Bit Rate 19.2K (19200)

For other printer defaults, refer to the Printer Defaults paragraph in Appen -

dix B, “Cross-Reference Tables.”

Error Messages

There are three cases where the computer may not connect to the printer.

Here are the three cases and error messages. Note that “x” indicates the

number assigned to the COM Port in question.