User's Manual

Using the 6820 Printer Configuration Utility
Chapter
—
4
60
6820 Series 80-Column Printer User’s Manual
Copying Font Files
To select font files, highlight the font files in the Fonts Available for Up-
date list. You c an highlight several files at one time. Then click the right
arrow pointing to the Fonts Selected for Update list to copy the selected
font files to this list. Below is a sample screen.
If you select enough fonts that go over the space allowed, an error message
will appear. Click OK to close the error message and not copy the font to
the Fonts Selected for Update list. If there are two or more fonts that ex-
ceed the space allowed, this message repeats until an error message is dis-
playedforeachofthefontfilesthatwentoverthespaceallowed.
Space in Flash
The Space Needed information shown beneath the Fonts Available for
Update list indicates the total space required (in bytes) for all of the fonts
in the list. The Space Remaining information listed below the Fonts Se-
lected for Update list displays the space remaining in the printer, given the
fonts in the Selected list.
Update Printer
This button updates the printer fonts and the control program depending
on the o ptions selected on the dialog. Note that if the Selected list is empty
and the Include control program u pdate is not checked, a “Nothing selected
for update” message appears in the text box.
S Formats the printer flash for font updates and writes new font files to
the printer for any fonts in the Selected list.
Click the top, right arrow to copy selected font files from the Fonts
Available for Update list to the Fonts Selected for Update list. Click
the bottom, left arrow to remove any selected files f rom the Fonts Se-
lected for Update list.