User's Manual

Using the 6820 Printer Configuration Utility
—
Chapter
4
49
6820 Series 80-Column Printer User’s Manual
Save to Printer
This option, selected from the Main Menu, allows you to send the work-
ing configuration to your 6820 Printer.
When To Printer from the Main Menu is clicked, a warning message (as
shown below) is displayed.
This means that the working configuration is copied into flash memory, in
your 6820 Printer, and overwrites the current configuration settings that
are in your printer. Click OK to for the system to connect to the printer
and transfer the configuration, or click Cancel to return to the Main Menu
without updating the printer.
Attempting a Connection to the Printer
After clicking OK , a message is displayed, informing you that the system is
attempting to establish c onnection with the printer. At this point you
should connect a s erial cable (P/N: 226-270-001) between your host com-
puter and the printer (if not already connected), then reset the printer.
Connection Failed
If the connection is not successful after the predetermined period of time
(approximately 20 seconds), the following message is displayed.
Click Yes to repeat the previous steps above (starting with Attempting a
Connection to the Printer), else click No. An error message (as s hown be-
low) is displayed informing you that the configuration was not saved.
Click No to return to the Main Menu without updating the printer.