User's Manual

Using the 6820 Printer Configuration Utility
Chapter
—
4
46
6820 Series 80-Column Printer User’s Manual
Canceling the Operation
Click Cancel to return to the Main Menu without making any changes. If
you have not made any changes to the Fonts Selected list, you return to
the Main Menu.
However, if you have already made some changes to the Fonts Selected
list, a confirmation message appears, similar to that shown below. Click
OK to return to the Main Menu w ith changes made to the Fonts Selected
list discarded. Click Cancel to remain in the Font Selection window.
Parameters Selection
This option, selected from the Main Menu, allows you to review or modify
the working configuration.
Click Parameters from the Main Menu to access the Parameters window
where you can modify any of the parameters that are not grayed out. De-
fault parameter values are marked with an asterisk (*).
Modifying Parameters
To modify the configuration, select parameters on this screen using your
pointing device.
Required for Bluetooth — Convert the Printer to Epson DTR Mode
Those using Bluetooth must switch the 6820 Printer from the Norand
Portable Communications Protocol (NPCP) mode to the Epson DTR
mode with the baud rate set to “19.2K” and the parity set to “None.”
Note: T he 6820 Bluetooth adapter does not support any other settings.