User's Manual

Using the 6820 Printer Configuration Utility
—
Chapter
4
45
6820 Series 80-Column Printer User’s Manual
Deleting Font Files
To avoid the problem of exceeding flash memory, you can delete fonts in
the printer flash, from the Fonts Selected list. To do this, select the font
names you want to delete in the Fonts Selected list, then click Erase to
clear the names from the Fonts Selected list.
Space Remaining in Flash
The Space Selection box, below the Fonts Selected list, displays the space
remaining in flash (in kilobytes), based on fonts currently selected. When
this number is negative, it means the available space in flash is less that the
size of the selected fonts. Delete some fonts before saving the rest.
Saving the Selected Fonts
Note that Save is initially grayed out, disabling its use. Once the Fonts Se-
lected list is changed, Save is enabled (no longer grayed out).
Fontsmarkedwithanasterisk(*),intheFonts Selected list, are currently
in printer flash, but not found on disk, and are lost when flash is updated
from disk (Save to Printer option).
When Save is clicked, and there is enough space in printer flash memory
for the fonts in the Fonts Selected list, the working configuration is up-
dated with the selected fonts. The amount of printer flash memory to
spare, after being loaded with the selected f onts, is s hown (in kilobytes) in
the Space box. As long as this number is not negative, there is enough
space for the selected fonts.
However, if you a ttempt to save fonts and there is not enough space in
printer flash memory, the following error message is displayed. Click OK
to return to the Font Selection window and delete fonts in the Fonts Se-
lected list.