User's Manual

OperationChapter —2
22 6820 Series 80-Column Printer User’s Manual
Setting the Paper
Do the following to feed the paper into the printer:
1 Press the FORM FEED button on the control panel to feed the paper
into the printer.
2 Lower the paper bail. An empty printer autofeeds new paper approxi-
mately 0. 1” (0.25 cm) beyond the top of the paper bail.
Note: The ideal distance to feed paper beyond the paper bail may vary
due to e nvir onmental conditions (such as humidity) and specific aspects
of certain paper. Use the green thumb wheel to position the paper to a
desired distance per your conditions.
Note: If your paper has a preprinted logo on every page, make sure the
print head is below the preprinted logo. If not, you can adjust the posi-
tion of the paper, either by pressing the LINE FEED button, or by us-
ing the green thumb wheel.
3 Once the paper is properly positioned, press the SET PAGE button,
thus clearing the PAPER OUT light, and to indicate where the top of
thepageis.
4 Close the printer lid. Ensure that the paper passes through the paper slot
when the printer begins to print.