User's Manual

Cross-Reference TablesAppendix
—
B
153
6820 Series 80-Column Printer User’s Manual
The settings in the previous table are installed in the printer at the factory.
To restore the printer to these defaults, see page 10 for instructions.
The default settings listed below can be restored to the printer, as described
in Chapter 4 , “Using the Configuration Utility.”
Function Default Value
Zero print option Zeros are printed with a slash
Autofeed configuration CR (carriage return added at end of line without line feed)
Protocol NPCP (NORAND Portable Communications Protocol)
Parity N/A (for NPCP)
Bit Rate 19.2K