User's Manual

Cross-Reference Tables
Appendix
—
B
150
6820 Series 80-Column Printer User’s Manual
Escape Sequence Quick Reference
The following table is a quick reference between the escape sequences
listed in ascending order, according to numeric values. For detailed defini-
tions, see Chapter 2, “Control Code Definitions.”
Decimal Description
ESC SO Select Double-Wide (expanded) Mode (one line only)
ESC SI Select Condensed Mode (compressed)
ESC DC2 Cancel Condensed Mode
ESC DC4 Cancel Double-Wide (expanded) Mode (one line only)
ESC US (0) Select Top-Down Printing
ESC US (1) Select Bottom-Up Printing
ESC SP n Define Inter-Character Space
ESC “!“n Master Select
ESC “$” n1 n2 Set Print Position (absolute)
ESC “%” (0) Select Default Character Set
ESC “%” (1) Select User-Defined Character Set
ESC “&” NUL k1 k2 s1 d1...d11 Define User-Defined Characters
ESC “*” m n1 n2 Select Graphics Mode
ESC “+” n d1...dn Print Character Graphics
ESC “-” 0* Cancel Underline Mode
ESC “-” 1* Select Underline Mode
ESC “/” c Select Vertical Tab Channel
ESC “0” Select 1/8 inch Line Spacing
ESC “1” Select 7/72 inch Line Spacing
ESC “2” Select 1/6 inch Line Spacing
ESC “3” n Select n/216 inch Line Spacing
ESC “4” Select Italic Mode
ESC “5” Cancel Italic Mode
ESC “6” Enable Printing of Codes 128-255
ESC “7” Disable Printing of Codes 128-255
ESC “<” Select Unidirectional Printing (one line only)
ESC “:” NUL NUL NUL Copy ROM to RAM
ESC “?” s n Reassign Graphics Mode
ESC “@” Perform Master Reset
ESC “A” n Select n/72 inch Line Spacing
ESC “B” NUL Clear Vertical Tabs
ESC “B” n1 n2 ... nk NUL SetVerticalTabs
ESC “C” n Set Page Length (lines)
ESC “C” NUL n Set Page Length (inches)