User's Manual

Bluetooth Configuration Commands
Appendix
—
A
137
6820 Series 80-Column Printer User’s Manual
Set Local Bluetooth Device Name
Command F0<Device Friendly Name><CR>
Definition “Device Name” — String up to 254 bytes long
Default “6820–DDEEFF“ where DDEEFF is from the Bluetooth device ad-
dress (AABBCCDDEEFF)
Example “F01Len’s 100%25 serial module<CR>“
This sets the name to “Len’s 100% serial module”
Set Class of Device/Service Field
Command S1< Class of Device/Service field >
Description The Class of Device/Service (CoD) field is a 24-bit field defined in
the Bluetooth Assigned Numbers document.
See Assigned Numbers - Bluetooth Baseband for up-to-date information
on how to compose this value. This field is sent in a HEX ASCII for-
mat, most significant byte first.
Example “S1001F00<CR>“ is a common Class of Device value for a basic serial
device.
Set Service Name
Command S2<Service Name>
Description Sets the service friendly name to send to the remote Bluetooth device
in response to a service discovery request. The length of the service
name is limited to 32 bytes.
Definition Profile Name — Text name entered into the SDP record for the s erial
port profile
Default “Wireless Printer”
Example “S3Acme Printer<CR> ”
Connectable On/Off: “ON” or “OFF”
Command C0 <ON|OFF><CR>
Description Sets the device into “connectable“ mode
Example “C0OFF<CR>“ — Become non-connectable
“C0ON<CR>“ — Become connectable