User's Manual

Control Code Definitions
Chapter
—
5
86
6820 Series 80-Column Printer User’s Manual
Select Default Character Set
If the Select User-Defined Set function was previously set, this function
switches back to the default character set. Note this function is only useful
with the default SBCS character set.
Format
Decimal Hex ASCII
27 37 0 1B 25 00 ESC “%” (0)
Enable Printing of Codes 128-255
All codes (128–255) are treated as printable characters, rather than control
codes, with this function. This allows the use of these characters for user-
defined characters. A user-defined s et must be selected, using the Select
User-Defined Set function, before these characters can print. Factory de-
fault disables printing of these codes. Note this function is only useful with
the d efault SBCS character set.
This function is only available when the default SBCS character set is se-
lected.
Format
Decimal Hex ASCII
27 54 1B 36 ESC “6”
Disable Printing of Codes 128-255
This disables the printing of codes (128–255), set by Enable Printing of
Codes 128–255.Bydefault,thesecodesaredisabled.
Format
Decimal Hex ASCII
27 55 1B 37 ESC “7”