User's Manual Part 4
Table Of Contents
- Using Configuration Commands
- Operating Modes
- Command and Control Modes
- Set Local Bluetooth Device Name
- Set Class of Device/Service Field
- Set Service Name
- Connectable On/Off
- Specify Page Scan Timing
- Enable Discoverable
- Specify Inquiry Scan Timing
- Set Encryption/Authentication: “PIN CODE”
- Manage Security Modes
- Read Module Version
- Read Local Device Address
- Set Shutdown Timing
- Clear Link Key Table
- Understanding Adapter States or Modes
- Power Management Flow Diagram
- Diagnostics Capabilities
- Applications
- System Qualification
- Default Configuration
- Control Codes and Escape Sequences
- Single Character Control Code Definitions
- Escape Sequence Quick Reference
- Factory-Installed Printer Defaults
- About the Printer Font Jobs
- Big 5 Traditional Chinese Character Set
- Simplified Chinese Character Set
- IBM 437 Code Page Character Set
- Japanese (Shift JIS) Character Set
- Korean Character Set
- International Character Set
Appendix B — Bluetooth Configuration Commands and Specifications
138 6822 Series 80-Column Printer User’s Manual
Specify Page Scan Timing
Enable Discoverable
Specify Inquiry Scan Timing
Example
“C0OFF<CR>” — Become non-connectable
“C0ON<CR>” — Become connectable
Command
C1<Page_Scan_Interval>,<Page_Scan_Window><
CR>
Description
Sets the Page Scan timing parameters
Default
4096,18
Example
“C11024,512<CR>”
Note: To enable scanning, the values for Interval and Window
must be in the range of 18 to 4096. The Window value must be
less than the Interval value. Both values must be zero to disable
scanning.
Note: Modifying Page Scan Timing can improve connection
times, but may adversely affect battery performance.
Command
D0 <ON|OFF><CR>
Description
Sets the device into “discoverable” mode
Example
“D0OFF<CR>” — Become non-discoverable
“D0ON<CR>” — Become discoverable
Command
D1<Inquiry_Scan_Interval>,<
Inquiry_Scan_Window><CR>
Description
Sets the Inquiry Scan timing parameters
Default
4096,18
Example
“D11024,512<CR>“