User's Manual Part 4
Table Of Contents
- Using Configuration Commands
- Operating Modes
- Command and Control Modes
- Set Local Bluetooth Device Name
- Set Class of Device/Service Field
- Set Service Name
- Connectable On/Off
- Specify Page Scan Timing
- Enable Discoverable
- Specify Inquiry Scan Timing
- Set Encryption/Authentication: “PIN CODE”
- Manage Security Modes
- Read Module Version
- Read Local Device Address
- Set Shutdown Timing
- Clear Link Key Table
- Understanding Adapter States or Modes
- Power Management Flow Diagram
- Diagnostics Capabilities
- Applications
- System Qualification
- Default Configuration
- Control Codes and Escape Sequences
- Single Character Control Code Definitions
- Escape Sequence Quick Reference
- Factory-Installed Printer Defaults
- About the Printer Font Jobs
- Big 5 Traditional Chinese Character Set
- Simplified Chinese Character Set
- IBM 437 Code Page Character Set
- Japanese (Shift JIS) Character Set
- Korean Character Set
- International Character Set
Appendix B — Bluetooth Configuration Commands and Specifications
136 6822 Series 80-Column Printer User’s Manual
Command and Control Modes
Query Mode Commands
Command Function
?<CR> Read ACK
?F0<CR> Read Friendly Name
?L<CR> Read Security Mode
?C0<CR> Read Connectable Mode
?C1<CR> Read Page Scan Timing
?D0<CR> Read Discoverable Mode
?D1<CR> Read Inquiry Scan Timing
?S1<CR> Read Class of Device
?S2<CR> Read Service Name
?S4<CR> Read PIN Code
?T0<CR> Read Shutdown Timeout in minutes
?B0<CR> Read Bluetooth Addresses of all the paired
devices
Example Commands
Command Reply
“?<CR>“ ”ACK<CR>”
“?F0<CR>” “f0MyFriendlyName<CR>”
“?L<CR>” “10<CR>” Turn off Encryption,
Authentication, and Exclusion
“11<CR>” Authentication
“12<CR>” Encryption and Authentication
“13<CR>” Encryption, Authentication,
and Exclusive
“?C0<CR>” ”c0ON<CR>”
“?C1<CR>” ”c11024,512<CR>”
“?D0<CR>” ”d0ON<CR>”
“?D1<CR>” ”d11024,512<CR>”
“?S1<CR>” ”s1001F00<CR>”
“?S2<CR>” ”s2MyServiceName<CR>”
“?S4<CR>” ”s4MyPinCode<CR>”
“?T0<CR>” “t0Shutdown Timer = 5 minutes<CR>”
“?B0<CR>” “b0No Devices PairedCR>”