User's Manual Part 4

Appendix C — Cross-Reference Tables
174 6822 Series 80-Column Printer User’s Manual
ESC “@” Perform Master Reset
ESC “A” n Select n/72 inch Line Spacing
ESC “B”
NUL Clear Vertical Tabs
ESC “B” n1 n2 ... nk NUL Set Vertical Tabs
ESC “C” n Set Page Length (lines)
ESC “C” NUL n Set Page Length (inches)
ESC “D”
NUL Clear Horizontal Tabs
ESC “D” n1 n2 ... nk NUL Set Horizontal Tabs
ESC “E” Select Emphasized Mode
ESC “F” Cancel Emphasized Mode
ESC “G” Select Double-Strike Mode
ESC “H” Cancel Double-Strike Mode
ESC “I” n Expand Printable Code Area
ESC “J” n Perform n/216 inch Line Feed
ESC “K” n1 n2 Select Single-Density Graphics Mode
ESC “L” n1 n2 Select Low-Speed Double-Density Graphics Mode
ESC “M” Select Elite Pitch
ESC “N” n Set Skip Over Perforation
ESC “O” Cancel Skip Over Perforation
ESC “P” Select Pica Pitch
ESC “Q” n Set Right Margin
ESC “R” n0 n1 n2 Code page Selection
ESC “R” n Select National Character Set
ESC “S” 0* Select Superscript Mode
ESC “S” 1* Select Subscript Mode
ESC “T” Cancel Superscript/Subscript Mode
ESC “U” 0* Cancel Unidirectional Printing
ESC “U” 1* Select Unidirectional Printing
ESC “W” 0* Cancel Double-Wide (expanded) Mode
ESC “W” 1* Select Double-Wide (expanded) Mode
ESC “Y” n1 n2 Select High-Speed Double-Density Graphics Mode
ESC “Z” n1 n2 Select Low-Speed Quadruple-Density Graphics Mode
Escape Sequence Quick Reference (continued)
Decimal Description