User's Manual Part 4

Appendix B — Bluetooth Configuration Commands and Specifications
6822 Series 80-Column Printer User’s Manual 147
Bondable State [Get/Set] (Authentication)
Encryption State [Get/Set]
Device Name [Get/Set]
Device Address[Get]
Class of Device[Get/Set]
Service Name [Get/Set]
Bluetooth Profile [Get]
Bluetooth Passkey [Set] (Get the fact that it is set)
Radio Shutdown Timeout
Bluetooth Performance
Range — Operating range is expected to range from a minimum
separation of 10 cm to over 10 m with a 700 Color or CK60.
Link Loss can occur when going in or out of range while
communicating with other Bluetooth devices.
Diagnostics Capabilities
The Bluetooth radio settings are available to a user. The 6822 Bluetooth
adapter sends a printout of Bluetooth information to the printer upon
receiving a message from a 700 Series or CK60 in a terminal holder. An
example self-test is shown below:
6822 Bluetooth Adapter
Firmware:Version YYYY MMDD HHMM
Bluetooth Configuration:
Device Address:0002371A0FD3
Device Name:6822-9843252
Discoverable:Yes
Connectable:Yes
Authentication:No
Encryption:No
Passkey:Not Applicable (or Key present if Authentication
is enabled)
Stored Link Keys:2 of 16
Power Management:
Shut Off Timer:120 minutes