User's Manual Part 4
Table Of Contents
- Using Configuration Commands
- Operating Modes
- Command and Control Modes
- Set Local Bluetooth Device Name
- Set Class of Device/Service Field
- Set Service Name
- Connectable On/Off
- Specify Page Scan Timing
- Enable Discoverable
- Specify Inquiry Scan Timing
- Set Encryption/Authentication: “PIN CODE”
- Manage Security Modes
- Read Module Version
- Read Local Device Address
- Set Shutdown Timing
- Clear Link Key Table
- Understanding Adapter States or Modes
- Power Management Flow Diagram
- Diagnostics Capabilities
- Applications
- System Qualification
- Default Configuration
- Control Codes and Escape Sequences
- Single Character Control Code Definitions
- Escape Sequence Quick Reference
- Factory-Installed Printer Defaults
- About the Printer Font Jobs
- Big 5 Traditional Chinese Character Set
- Simplified Chinese Character Set
- IBM 437 Code Page Character Set
- Japanese (Shift JIS) Character Set
- Korean Character Set
- International Character Set
Appendix B — Bluetooth Configuration Commands and Specifications
6822 Series 80-Column Printer User’s Manual 145
Radio Power On/Off Mechanism
As stated earlier, the Bluetooth adapter, including the Bluetooth radio
shuts down after a configurable time (default is two hours of idle time).
To wake the Bluetooth adapter, the 6822 is powered on by any button
push on the printer control panel. There are two ways to shutdown the
Bluetooth module power:
• A 700 Series, CK60, or CN3 initiates a pass through mode, or
• The Bluetooth module sends a shutdown signal after a configurable
amount of time. Default is two hours of idle time.
Persistent Storage
These settings do not reset after a cold–boot is performed on the printer:
• Bluetooth Bonding Enable/Disable
• Bluetooth Encryption Enable/Disable
• Bluetooth Passkey
• Bluetooth Bonding List (Link Keys)
• Bluetooth Device Name
• Bluetooth Class of Device
• Discoverable setting
• Connectable setting
• Radio Shutdown Timer Timeout (default two hours of idle time)
System Behavior/Software Considerations
• Discoverability — The default mode is Discoverable.
When configured to be discoverable, the adapter is discoverable at all
times, except when:
• an active Bluetooth connection exists
Note: The shutdown timer configuration is addressed in
Appendix A “Bluetooth Configuration Commands”.
Note: The adapter complies with Bluetooth 1.1 specification,
including bonding for authentication and enabling encryption.