User's Manual Part 4
Table Of Contents
- Using Configuration Commands
- Operating Modes
- Command and Control Modes
- Set Local Bluetooth Device Name
- Set Class of Device/Service Field
- Set Service Name
- Connectable On/Off
- Specify Page Scan Timing
- Enable Discoverable
- Specify Inquiry Scan Timing
- Set Encryption/Authentication: “PIN CODE”
- Manage Security Modes
- Read Module Version
- Read Local Device Address
- Set Shutdown Timing
- Clear Link Key Table
- Understanding Adapter States or Modes
- Power Management Flow Diagram
- Diagnostics Capabilities
- Applications
- System Qualification
- Default Configuration
- Control Codes and Escape Sequences
- Single Character Control Code Definitions
- Escape Sequence Quick Reference
- Factory-Installed Printer Defaults
- About the Printer Font Jobs
- Big 5 Traditional Chinese Character Set
- Simplified Chinese Character Set
- IBM 437 Code Page Character Set
- Japanese (Shift JIS) Character Set
- Korean Character Set
- International Character Set
Appendix B — Bluetooth Configuration Commands and Specifications
6822 Series 80-Column Printer User’s Manual 141
Set Shutdown Timing
Clear Link Key Table
Understanding Adapter States or Modes
The Bluetooth adapter connects to an internal serial port of the 6822,
providing serial print data over a transparent Bluetooth link, running a
Serial Port Profile (SPP).
Printing is primarily accomplished over a Bluetooth link using the SPP
protocol with a 700 Series or CK60 Mobile Computer. If the relevant
printer configuration allows it, a 700 Series or CK60 in a terminal holder
charges normally.
Command
T0<Time in Minutes><CR>
Description
“Time” – Integer value – 0 implies never expire the
timer
Range
0-270 minutes
Default
120
Example
“T0120<CR>” This sets the shutdown timer to 120
minutes.
Command
B0<CLR><CR>
Description
Clear Pair or Bonding command cleans up
all of the link key and Bluetooth address
combination PSKEYs.
Default
None
Example
“B0CLR<CR>” This clears all saved link
keys.