User's Manual Part 4
Table Of Contents
- Using Configuration Commands
- Operating Modes
- Command and Control Modes
- Set Local Bluetooth Device Name
- Set Class of Device/Service Field
- Set Service Name
- Connectable On/Off
- Specify Page Scan Timing
- Enable Discoverable
- Specify Inquiry Scan Timing
- Set Encryption/Authentication: “PIN CODE”
- Manage Security Modes
- Read Module Version
- Read Local Device Address
- Set Shutdown Timing
- Clear Link Key Table
- Understanding Adapter States or Modes
- Power Management Flow Diagram
- Diagnostics Capabilities
- Applications
- System Qualification
- Default Configuration
- Control Codes and Escape Sequences
- Single Character Control Code Definitions
- Escape Sequence Quick Reference
- Factory-Installed Printer Defaults
- About the Printer Font Jobs
- Big 5 Traditional Chinese Character Set
- Simplified Chinese Character Set
- IBM 437 Code Page Character Set
- Japanese (Shift JIS) Character Set
- Korean Character Set
- International Character Set
Appendix B — Bluetooth Configuration Commands and Specifications
140 6822 Series 80-Column Printer User’s Manual
In Mode L3, only one device is allowed to connect. This device is paired
and bonded and needs to supply the PIN code only on the initial
connection.
Read Module Version
Read Local Device Address
Example:
Sent: “V1<CR>“
Received: ”v1%00%2C%C6%03%45%39”
Note: Some of the Bluetooth user interfaces cannot supply a
NULL string as a PIN code. Use the S4 command to specify a
PIN code that is not NULL.
Command
V0<CR>
Description
Displays the firmware build version currently
running
Example
“V0<CR>“
Returns: “v1yyyymmddHHMM<CR>”
Note: This command responds with the requested data, only
not the “ACK<CR>”.
Command
V1<CR>
Description
Displays the local device address
Returns
“v1%xx%xx%xx%xx%xx%xx<CR>”
Note: This command responds with the requested data, only
not the “ACK<CR>”.