User's Manual Part 2
Table Of Contents
- Connecting to the Printer
- Understanding the Font Modules
- Using the Windows 95 or Windows 98 Printer Configuration Utility
- Using the Windows 2000 or Windows XP Printer Configuration Utility
- Understanding Control Code Definitions
- Using Printer Control Codes
- Backspace
- Beeper
- Cancel Line
- Carriage Return
- Delete
- Form Feed
- Select Half-Speed Printing
- Cancel Half-Speed Printing
- Set Inactivity Time for Sleep Mode
- Line Feed
- Perform Master Reset
- Set Print Position (absolute)
- Set Print Position (relative)
- Page Formatting Functions
- Character Style and Text Mode Functions
- Defining Intercharacter Space
- Tabs and Tab Setting Functions
- Using Character Sets and User-Defined Functions
- Single-Byte Character Sets
- Double-Byte Character Sets
- Multi-Byte Character Sets
- Select National Character Set
- Hebrew Character Fonts
- User Defined Characters
- Copy ROM to RAM
- Define User-Defined Characters
- Select User-Defined Character Set
- Select Default Character Set
- Enable Printing of Codes 128-159
- Disable Printing of Codes 128-159
- Expand Printable Code Area
- Enable Printing of Character Graphics
- Disable Printing of Character Graphics
- Printing Character Graphics
- Graphics Functions
Chapter 4 — Configuring the Printer
40 6822 Series 80-Column Printer User’s Manual
Saving Files to the Printer
Select the Save File to Printer option from the Main Menu, to send the
working configuration to your 6822. When you select this option, the
following warning message is displayed:
The message indicates the configuration will be copied into the 6822
flash memory and overwrite the current configuration. Click OK for the
system to connect to the printer and transfer the configuration, or Cancel
to return to the Main Menu without updating the printer.
Connecting to the printer
1 After you click OK, a message appears informing you that the
system is attempting to establish connection with the printer.
2 Connect a serial cable (P/N 226-270-001) between your PC and the
printer.
3 Press the Reset button to reset the printer.
4 If the connection is not successful after approximately 20 seconds,
the following message is appears.
5 Click Yes to retry making a connection to the printer.