User's Manual Part 2
Table Of Contents
- Connecting to the Printer
- Understanding the Font Modules
- Using the Windows 95 or Windows 98 Printer Configuration Utility
- Using the Windows 2000 or Windows XP Printer Configuration Utility
- Understanding Control Code Definitions
- Using Printer Control Codes
- Backspace
- Beeper
- Cancel Line
- Carriage Return
- Delete
- Form Feed
- Select Half-Speed Printing
- Cancel Half-Speed Printing
- Set Inactivity Time for Sleep Mode
- Line Feed
- Perform Master Reset
- Set Print Position (absolute)
- Set Print Position (relative)
- Page Formatting Functions
- Character Style and Text Mode Functions
- Defining Intercharacter Space
- Tabs and Tab Setting Functions
- Using Character Sets and User-Defined Functions
- Single-Byte Character Sets
- Double-Byte Character Sets
- Multi-Byte Character Sets
- Select National Character Set
- Hebrew Character Fonts
- User Defined Characters
- Copy ROM to RAM
- Define User-Defined Characters
- Select User-Defined Character Set
- Select Default Character Set
- Enable Printing of Codes 128-159
- Disable Printing of Codes 128-159
- Expand Printable Code Area
- Enable Printing of Character Graphics
- Disable Printing of Character Graphics
- Printing Character Graphics
- Graphics Functions
Chapter 4 — Configuring the Printer
6822 Series 80-Column Printer User’s Manual 37
Selecting Parameters
To select a parameter
• Click Parameters from the Main Menu to access the Parameters
window where you can modify any of the parameters that are not
grayed out. Default parameter values are marked with an asterisk (*).
To modify parameter configurations
• Select parameters on the screen using your stylus.
To save parameters
• Click Save to update the working configuration and return to the
Main Menu.
To cancel the operation
• Click Cancel to return to the Main Menu without modifying any
configuration parameters.
Note: If you are using Bluetooth communication, you must change
from the Norand Portable Communications Protocol (NPCP) mode to
the Epson DTR mode with the baud rate set to 19.2 K and the parity set
to None.