User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CV30 Fixed Mount Computer
- Chapter 2 - Understanding Windows CE
- Chapter 3 - Configuring the CV30
- Configuring the CV30 Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CV30
- Understanding the Wireless Network
- Using WPA Security
- Using Static WEP Security
- Using 802.1x Security
- Using LEAP Security
- Choosing Between Funk and Microsoft Security
- Configuring Funk Security Using Intermec Settings
- Configuring Funk Security Using the Profile Wizard
- Configuring WEP Security With Profile Wizard
- Configuring WPA-PSK Security With Profile Wizard
- Configuring WPA2-PSK Security With Profile Wizard
- Configuring PEAP Security With Profile Wizard
- Configuring TLS Security With Profile Wizard
- Configuring TTLS Security With Profile Wizard
- Configuring LEAP Security With Profile Wizard
- Configuring EAP-FAST with Profile Wizard
- Configuring Microsoft Security
- Loading a Certificate
- Disabling Security
- Chapter 4 - Developing and InstallingApplications
- Chapter 5 - Troubleshooting andMaintaining the CV30
- Appendix - Specifications
- Index
Chapter 3 — Configuring the CV30
58 CV30 Fixed Mount Computer With Windows CE User’s Manual
Configuring EAP-FAST with Profile Wizard
The EAP-FAST protocol is a client-server security architecture
that encrypts EAP transactions with a TLS tunnel. While similar
to PEAP, EAP-FAST differs significantly since tunnel
establishment is based on strong secrets unique to users. These
secrets are called Protected Access Credentials (PACs), which
CiscoSecure ACS generates using a master key known only to
CicsoSecure ACS. EAP-FAST does not require certificate
management.
To configure EAP-FAST with Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose EAP-FAST.
3 For Association, choose Open, WPA, WPA2, or Network
EAP.
4 For Encryption, choose WEP or CKIP if you selected
Network EAP for association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this
protocol.
7 Select Prompt for password to have the user enter this
password each time to access the protocol, or select Use
following password to use the protocol without entering a
password each time you use the CV30.
8 Tap Additional Settings to set options for PAC management
and assign an anonymous EAP-FAST name.