User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CV30 Fixed Mount Computer
- Chapter 2 - Understanding Windows CE
- Chapter 3 - Configuring the CV30
- Configuring the CV30 Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CV30
- Understanding the Wireless Network
- Using WPA Security
- Using Static WEP Security
- Using 802.1x Security
- Using LEAP Security
- Choosing Between Funk and Microsoft Security
- Configuring Funk Security Using Intermec Settings
- Configuring Funk Security Using the Profile Wizard
- Configuring WEP Security With Profile Wizard
- Configuring WPA-PSK Security With Profile Wizard
- Configuring WPA2-PSK Security With Profile Wizard
- Configuring PEAP Security With Profile Wizard
- Configuring TLS Security With Profile Wizard
- Configuring TTLS Security With Profile Wizard
- Configuring LEAP Security With Profile Wizard
- Configuring EAP-FAST with Profile Wizard
- Configuring Microsoft Security
- Loading a Certificate
- Disabling Security
- Chapter 4 - Developing and InstallingApplications
- Chapter 5 - Troubleshooting andMaintaining the CV30
- Appendix - Specifications
- Index
Chapter 3 — Configuring the CV30
50 CV30 Fixed Mount Computer With Windows CE User’s Manual
The Profile Wizard appears on the screen.
2 From the Profile list, select the profile you want to configure.
3 Tap Edit Selected Profile.
4 (Optional) Give your profile a meaningful name by selecting
the text in the Profile Label text box and typing a meaningful
name.
5 From the Network type list, select either Infrastructure or
Ad-Hoc. Select Infrastructure if the network uses access
points to connect to the corporate network or internet. Select
Ad-Hoc to set up a private network with one or more
participants.
6 Enter the SSID (Network Name).
7 Tap OK.