User's Manual

Chapter 3 — Configuring the CV30
48 CV30 Fixed Mount Computer With Windows CE User’s Manual
b Select Password prompt, and choose Enter password
now.
c Select User Password and type a user password.
d For Validate Ser ver Certificate, choose Enabled.
If you choose TLS:
a Load a user and root certificate on your CV30. For help,
see “Loading a Certificate” on page 62.
b For Validate Ser ver Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
7 Save your settings.
Configuring LEAP Security on the CV30
1 Open Intermec Settings.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 From Intermec Settings, choose Communications > 802.11
Radio > Funk Security > Profile.
4 For 8021x, choose LEAP.
5 For Association, choose Open, WPA, WPA2, or Network
EAP. Encryption automatically defaults to TKIP if you
choose WPA, to AES if you choose WPA2, and to WEP if
you choose Open or Network EAP.
6 For Prompt for Credentials, choose Enter credentials now.
7 Select User name and type your user name.
8 Select User Password and type a user password.
9 Save your settings.
Note: You can use Prompt for password to troubleshoot your
connection to the network if you have problems.