User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CV30 Fixed Mount Computer
- Chapter 2 - Understanding Windows CE
- Chapter 3 - Configuring the CV30
- Configuring the CV30 Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CV30
- Understanding the Wireless Network
- Using WPA Security
- Using Static WEP Security
- Using 802.1x Security
- Using LEAP Security
- Choosing Between Funk and Microsoft Security
- Configuring Funk Security Using Intermec Settings
- Configuring Funk Security Using the Profile Wizard
- Configuring WEP Security With Profile Wizard
- Configuring WPA-PSK Security With Profile Wizard
- Configuring WPA2-PSK Security With Profile Wizard
- Configuring PEAP Security With Profile Wizard
- Configuring TLS Security With Profile Wizard
- Configuring TTLS Security With Profile Wizard
- Configuring LEAP Security With Profile Wizard
- Configuring EAP-FAST with Profile Wizard
- Configuring Microsoft Security
- Loading a Certificate
- Disabling Security
- Chapter 4 - Developing and InstallingApplications
- Chapter 5 - Troubleshooting andMaintaining the CV30
- Appendix - Specifications
- Index
Chapter 5 — Troubleshooting and Maintaining the CV30
90 CV30 Fixed Mount Computer With Windows CE User’s Manual
To clean boot the CV30
1 Press the Power button to turn off the CV30 and hold.
2 Using a small pointed device (such as the end of the stylus) or
your finger, press the Reset switch on the top of the CV30.
The blue light on the CV30 blinks once and the CV30 starts
the booting sequence.
3 Release the Power button when a Warning message appears
on the display asking if you want to clean boot the system.
4 Press the Volume Up button to start the clean boot process.
After some programs load, you are prompted to calibrate the
screen.
5 Calibrate the screen and then tap anywhere on the screen to
exit the application. The CV30 continues with the boot
process.
6 Reload any custom applications that may have been erased
during the clean boot and reset the time and date.
To preserve application programs through a clean boot, you
must store them in the Flash File Store.
Do not use force or a sharp object when pressing the reset
switch. You may damage the reset switch.
802.11
Reset