User's Manual

Chapter 3 — Configuring the CK32 I-Safe
62 CK32 I-Safe Handheld Computer User’s Manual
If you choose TLS:
a Load a user and root certificate on your CK32 I-Safe. For
help, see “Loading a Certificate” on page 76.
b For Validate Ser ver Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
8 Save your settings.
To enable WPA-PSK or WPA2-PSK with Funk security
1 Open Intermec Settings.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 Make sure you have selected Funk as your security choice.
4 Open Intermec Settings.
5 Choose Communications > 802.11 Radio > Funk Security
> Profile.
6 For Association, choose WPA or WPA2.
7 For 8021x, choose None.
8 For Pre-Shared Key, enter the pre-shared key or the
passphrase.
The pre-shared key may be given in hexadecimal by prefixing
a string of 64 hex digits with 0x for a total of 66 characters, or
by entering a passphrase of 8 to 63 characters.
The pre-shared key value must exactly match the key on the
authenticator.
9 Save your settings.
Configuring 802.1x Security With Funk Securi
ty
1 Open Intermec Settings.
Note: You must have the date on the CK32 I-Safe set
correctly when you enable Validate Server Certificate.