User's Manual
Table Of Contents
- Before You Begin
- Using the CK32 I-Safe Handheld Computer
- Understanding Windows Mobile
- Configuring the CK32 I-Safe
- Configuring the Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CK32 I-Safe
- Developing and Installing Applications
- Troubleshooting and Maintenance
- Specifications
- Physical and Environmental Specifications
- Accessories
- AN1 Communications Adapter (P/N 871-223-xxx)
- AC11 Quad Battery Charger (P/N 852-914-xxx)
- Handle (P/N 714-625-xxx)
- Hand Strap (P/N 825-183-xxx)
- Carrying Strap Kit (P/N 825-186-xxx)
- AB6 Battery Pack (P/N 318-021-xxx)
- Tethered Stylus (P/N 203-828-xxx)
- Battery Eliminator (P/N 714-619-xxx)
- Power Supply (P/N 851-061-xxx)
- Screen Protector (P/N 346-065-004)
- Index
Chapter 3 — Configuring the CK32 I-Safe
44 CK32 I-Safe Handheld Computer User’s Manual
To manually enter the device address of the printer
3 Type the address of the printer in the Enter Device Address
text box and then tap OK. The keyword -unknown- appears
in the Device Name field in the Current Wireless Printer box.
The name of the printer is not sent to the CK32 I-Safe when
you manually enter the printer address.
4 Tap Tes t Pri n t . The printer prints out the test page.
To choose the printer from a list of previously discovered printers
1 Make sure you have already performed a Bluetooth device
discovery.
1 Select Start > Settings > the System tab > Wireless
Printing. The Wireless Printing wizard appears.
2 Tap Manual > Acquire Printer. The wizard advances to the
next screen where you enter the device address.
2 Select Start > Settings > the System tab > Wireless
Printing. The Wireless Printing wizard appears.
3 Tap Set Different Printer. The Devices list appears with the
list of previously discovered printers.
4 Select the printer you want and tap OK.
5 Tap Tes t Pri n t . The printer prints out the test page.