User's Manual
Table Of Contents
- Before You Begin
- Using the CK32 I-Safe Handheld Computer
- Understanding Windows Mobile
- Configuring the CK32 I-Safe
- Configuring the Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CK32 I-Safe
- Developing and Installing Applications
- Troubleshooting and Maintenance
- Specifications
- Physical and Environmental Specifications
- Accessories
- AN1 Communications Adapter (P/N 871-223-xxx)
- AC11 Quad Battery Charger (P/N 852-914-xxx)
- Handle (P/N 714-625-xxx)
- Hand Strap (P/N 825-183-xxx)
- Carrying Strap Kit (P/N 825-186-xxx)
- AB6 Battery Pack (P/N 318-021-xxx)
- Tethered Stylus (P/N 203-828-xxx)
- Battery Eliminator (P/N 714-619-xxx)
- Power Supply (P/N 851-061-xxx)
- Screen Protector (P/N 346-065-004)
- Index
Chapter 1 — Using the CK32 I-Safe Handheld Computer
20 CK32 I-Safe Handheld Computer User’s Manual
To scan most bar code labels and verify scanner operation
1 Press the Power button to turn on the CK32 I-Safe.
2 Tap Start on the navigation bar located at the top of the
screen.
3 Tap Word Mobile > New to open the Word Mobile
application and a blank document.
4 Point the scanner window at the bar code label and hold the
computer at a slight angle 15 to 25 cm (6 to 10 in) from the
label.
5 Press the Scan button on the keypad, or pull the trigger on a
handle, and direct the red beam so that it falls across all bars
in the bar code label.
The information you scanned appears in the Word Mobile
document.
Code 39 Test Bar Code
*123456*
*123456*
When the CK32 I-Safe successfully reads a bar code label, you
hear a high beep and the green Good Read light turns on
briefly.
*INTERMEC*
*INTERMEC*