User's Manual

Chapter 1 — Using the CK32 I-Safe Handheld Computer
18 CK32 I-Safe Handheld Computer User’s Manual
You can also change the beeper volume using the Intermec
Setting application or by using the Beeper Volume command as
described below.
Additional Ways of Changing the Beeper Volume
Scanning Bar Codes
Use the scanner to scan and enter bar code data. The CK32
I-Safe supports the scanning of 1D linear bar codes.
When you unpack the CK32 I-Safe, these bar code symbologies
are enabled:
•Code 39
•Code 128
•PDF417
•UPC-A
•UPC-E
•EAN-8
• EAN-13
If you are using bar code labels that are encoded in a different
symbology, you need to enable the symbology on the CK32
I-Safe. Use Intermec Settings to enable and disable symbologies
for your scanner.
Method Procedure
Use the Intermec
Settings application.
Go to Start > Settings > System > Intermec
Settings > Device Settings > Beeper > Volume.
Remember to press Save when using Intermec
Settings.
Use the Beeper
Volume command.
For help, see “Beeper Volume” in the Intermec
Computer Command Reference Manual.
Do not look directly into the window area or at a reflection of
the beam while the CK32 I-Safe is scanning. Long-term
exposure to the beam can damage your vision.