User's Manual
Table Of Contents
- Before You Begin
- Using the CK32 I-Safe Handheld Computer
- Understanding Windows Mobile
- Configuring the CK32 I-Safe
- Configuring the Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CK32 I-Safe
- Developing and Installing Applications
- Troubleshooting and Maintenance
- Specifications
- Physical and Environmental Specifications
- Accessories
- AN1 Communications Adapter (P/N 871-223-xxx)
- AC11 Quad Battery Charger (P/N 852-914-xxx)
- Handle (P/N 714-625-xxx)
- Hand Strap (P/N 825-183-xxx)
- Carrying Strap Kit (P/N 825-186-xxx)
- AB6 Battery Pack (P/N 318-021-xxx)
- Tethered Stylus (P/N 203-828-xxx)
- Battery Eliminator (P/N 714-619-xxx)
- Power Supply (P/N 851-061-xxx)
- Screen Protector (P/N 346-065-004)
- Index
Chapter 1 — Using the CK32 I-Safe Handheld Computer
CK32 I-Safe Handheld Computer User’s Manual 7
Understanding the Low Battery Warnings
When the battery charge is getting low, you will receive an
audible alert and an initial pop-up warning message with a blue
border. The warning message indicates “Main Battery Low. To
prevent possible data loss, replace or recharge your battery
according to the owner’s manual.” A second battery icon with an !
inside also appears on the Status bar.
If the first warning is not dismissed, it is followed by another
audible alert and a second pop-up warning message with a red
border. This message indicates “Main Battery Very Low. To
prevent possible data loss, replace or recharge your battery
according to the owner’s manual.”
If the battery charge continues to drop, the red battery status
LED blinks and the CK32 I-Safe enters Suspend mode. If the
battery charge continues to drop, the battery status LED will stop
blinking
You can change the audible alert using the Sounds &
Notifications applet.
To change the audible alert
•Tap Settings > Personal > Sounds & Notifications.