User's Manual

Table Of Contents
Chapter 5— Troubleshooting and Maintenance
112 CK32 I-Safe Handheld Computer User’s Manual
Cleaning the Scanner Window and Screen
Clean the scanner window and screen as often as needed for the
environment in which you are using the computer. To clean the
window and screen, use a solution of ammonia and water.
Mixing of ammonia and water should be done in a well
ventilated area.
To clean the scanner window and computer screen
1 Press the Power button to turn off the CK32 I-Safe.
2 Dip a clean towel or rag in the ammonia solution and wring
out the excess. Wipe off the scanner window and screen. Do
not allow any abrasive material to touch these surfaces.
3 Wipe dry.
Cleaning the Handle and Computer
The exterior of the computer and the handle should be cleaned
with a mild solution of soap and water. Other cleaners may affect
the ESD dissipation characteristics of the handle and CK32
I-Safe body.
Mild soap refers to soaps you use on your hands and/or body that
don't contain any abrasive media or filler. The soap should not
contain a large amount of artificial fragrance or any of the
following: witch hazel, aloe vera, vegetable and herbal oils such as
evening primrose oil, olive oil, or coconut oil, or chamomile,
lavender, rosemary or peppermint. Do not use products labeled
as detergents.
Examples of mild soaps are:
Ivory Snow liquid or powder
•Ivory bar soap
Jergens mild soap (bar)
Woolite (an exception to hand/body soaps)
There are no user-serviceable parts inside the CK32 I-Safe or
in the battery. Opening the unit outside of an Intermec
approved service facility will void the I-Safe certification.