User's Manual
Table Of Contents
- Before You Begin
- Using the CK32 I-Safe Handheld Computer
- Understanding Windows Mobile
- Configuring the CK32 I-Safe
- Configuring the Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CK32 I-Safe
- Developing and Installing Applications
- Troubleshooting and Maintenance
- Specifications
- Physical and Environmental Specifications
- Accessories
- AN1 Communications Adapter (P/N 871-223-xxx)
- AC11 Quad Battery Charger (P/N 852-914-xxx)
- Handle (P/N 714-625-xxx)
- Hand Strap (P/N 825-183-xxx)
- Carrying Strap Kit (P/N 825-186-xxx)
- AB6 Battery Pack (P/N 318-021-xxx)
- Tethered Stylus (P/N 203-828-xxx)
- Battery Eliminator (P/N 714-619-xxx)
- Power Supply (P/N 851-061-xxx)
- Screen Protector (P/N 346-065-004)
- Index
Chapter 5— Troubleshooting and Maintenance
102 CK32 I-Safe Handheld Computer User’s Manual
The SmartSystem Console screen has three sections:
• Keypad Computers (devices you are using)
• SmartSystem Applications (used to upgrade)
• Software Vault (where your upgrades are stored)
4 Click the Discover icon on the SmartSystems Console. Your
CK32 I-Safe should appear in the Keypad Computers area of
the screen.
5 Click and drag the OS bundle from the Software Vault and
drag to the C32 I-Safe icon. Release the OS bundle on the
device icon and the following message will appear.
6 Click the Yes button and SmartSystems Server will start
transferring files to the CK32 I-Safe. A white screen with text
on it will appear on the CK32 I-Safe icon as the files are being
downloaded.
When the file download is complete, the CK32 I-Safe performs a
warm boot and starts to install the upgrade files. After the OS file
installation is completed, the CK32 I-Safe warm boots again and
the Windows Mobile welcome screen appears. You will need to
recalibrate the screen at this time.
To upgrade the SSPB
1 Connect your the CK32 I-Safe to your network that has the
SmartSystem Server installed.
2 Install SmartSystems Foundation on your desktop or laptop
computer, then double-click the icon on your toolbar to start
the SmartSystems Console.
Make sure that the CK32 I-Safe does not suspend during the
download or errors could occur.