User's Manual

Chapter 3 — Developing and Installing Applications
58 CN30 Mobile Computer User’s Manual
3 Click (+) to expand the AutoRun System component, click (+) to
expand the Destination Media option, then select the Secure Digital
Card option.
4 Click Install to install the AUTORUN files onto the storage card.
5 Create a “\CabFiles” folder on the storage card. Copy any CAB files
that are to be extracted on every startup into this folder.
6 In the “\2577” directory, add your custom AUTOUSER.DAT file.
See the Recovery Help for more information on how to set up an
AUTOUSER.DAT file.
Note: The CN30 Computer automatically calls the RegFlushKey()
API every 5 seconds.
7 If you are using the RegFlushKey() API, you must enable persistent
registry storage as follows. See Appendix A, “Configurable Settings,”
for more information about the Utilities control panel applet.
• From the CN30 Computer, tap Start > Settings > Control
Panel.
• ouble-tap the Utilities icon, then tap the Registry Save tab.
• b Tap Enable Registry Storage to save the registry in the Flash
File System (PSM) via the “\Flash_File_Store” path.
• Tap OK to save your entry and exit the applet.
8 Remove the storage card from the PC and install the card into the
CN30 Computer.
9 Perform a cold-boot on the CN30 Computer. Files automatically
install from the storage card upon reboot. Any calls to the RegFlush-
Key() API automatically writes the registry to the Flash File Store.