User's Manual

Chapter 3 — Developing and Installing Applications
CN30 Mobile Computer User’s Manual 57
Using a Storage Card
Use the following steps to install an application using a storage card:
1 Suspend the CN30 Computer and remove its Secure Digital storage
card.
2 Using a Secure Digital Adapter card, place the Secure Digital storage
card in your PC card drive, then create a subdirectory on the PCMCIA
Secure Digital drive in which to store your application.
3 Use the CEImager application to add the autorun system to the storage
card. See the Software Tools User’s Manual to learn about CEImager.
4 Copy your application, data files, and all required DLLs and drivers to
the subdirectory created on the Secure Digital storage card.
5 Add your application to the AUTOUSER.DAT file on the
“\SDMMC Disk\2577” directory with the following statement:
RUN=\<your directory>\<yourapp.exe>
where your directory is the directory on the Secure Digital storage card
where the application was installed, and yourapp.exe is the name of your
application. Finish the “RUN=” statement with a carriage return linefeed
combination. There may be multiple run statements in the file.
6 Remove the Secure Digital storage card from your PC and reinstall it
into the CN30 Computer, then warm-boot the CN30 Computer to add
these files to the Secure Digital storage card.
If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-
rect, the task manager launches and executes your program on startup.
Updating the System Software
You can use the Intermec Developer’s Library CD to reinstall or update the
operating system software on the CN30 Computer. For more information,
contact your Intermec representative.
Application Migration
Note: These instructions assume that the CN30 Management Tools por-
tion of the Intermec Developer’s Library CD was installed on your PC and
that a storage card was added to the base configuration of the CN30 Com-
puter.
Do the following required steps to ensure that CAB files are restored, appli-
cations automatically start, and registry is restored on cold-boot:
1 From your PC, double-click the Intermec CE Imager icon to access
the Intermec CEImager application. If this icon is not visible, then dou-
ble-click the CEIMAGER.EXE executable from the
“C:\Intermec\CN30 Mgmt Tools\Tools\CEImager” folder.
2 Click Default under Components List to activate the components.