User's Manual
Table Of Contents
- Before You Begin
- Safety Icons
- Global Services and Support
- Chapter 1 Using the CN30 Mobile Computer
- Audio
- Using the Battery
- Charging and Installing the Battery
- Beeper
- Select a Beeper Volume
- Using the Keypad
- Using the Power (I) Key
- Using the Screen
- Resetting Your CN30 Mobile Computer
- Software Build Version
- Chapter 2 Windows Mobile Version 5.0
- To Check the Intermec Build
- Where to Find Information
- Getting Started
- Programs
- Entering Information
- Selecting the Writing
- Converting Writing to Text
- Customizing Your CN30 Mobile Computer
- Adding Programs Using ActiveSync
- Microsoft ActiveSync
- Adding a Program to the Start Menu
- Microsoft Pocket Outlook
- Tasks: Keeping a To Do List
- Notes: Capturing Thoughts and Ideas
- Chapter 3 Installing Applications
- Installing Applications
- Using Microsoft ActiveSync
- Using a Storage Card
- Migrating from Another Computer
- Chapter 4 Network Support
- Configuring the CN30 With the setup Assistant
- Configuring 802.1X Radio Communications
- Configuring the Network Parameters for a TCP/IP Network
- Configuring Security
- Configuring 802.1X Security
- Loading Certificates
- Configuring a VPN
- SNMP Configuration on the CN30 Mobile Computer
- Chapter 7 Programming
- Creating CAB Files
- Creating CAB Files with the CAB Wizard
- Customization and Lockdown
- Networking APIs
- Basic Connect/Disconnect Functions
- Appendix A Specifications
- Physical and Environmental Specifications
- Hardware
- Power Specifications
- Accessories
Chapter 7 — Programming
146 CN30 Mobile Computer User’s Manual
This IOCTL returns the serial number of the device in BCD format. Six bytes are returned in the buffer pointed to
by the lpOutBuffer parameter.
ITC_NVPARM_MANF_DATE
This IOCTL returns the device date of manufacture in the BCD YYYY/MM/DD format. Four bytes are returned in
the buffer pointed to by the lpOutBuffer parameter.
ITC_NVPARM_SERVICE_DATE
This IOCTL returns the device’s date of last service in BCD YYYY/MM/DD format. Four bytes are returned in the
buffer pointed to by the lpOutBuffer parameter.
ITC_NVPARM_DISPLAY_TYPE
This IOCTL returns the device’s display type. One byte is returned in the buffer pointed to by the lpOutBuffer
parameter.
ITC_NVPARM_ECN
This IOCTL returns ECNs applied to the device in a bit array format. Four bytes are returned in the buffer pointed
to by the lpOutBuffer parameter.
ID Field Values (continued)
ITC_NVPARM_CONTRAST
This IOCTL returns the device default contrast setting. Two bytes are returned in the buffer pointed to by the
lpOutBuffer parameter.
ITC_NVPARM_MCODE
This IOCTL returns the manufacturing configuration code for the device. Sixteen bytes are returned in the buffer
pointed to by the lpOutBuffer parameter.
ITC_NVPARM_VERSION_NUMBER
This IOCTL returns the firmware version for various system components. These values for the ClassId field of the
PARMS structure are allowed when ITC_NVPARM_VERSION_NUMBER is used in the id field:
S VN_CLASS_KBD Returns a five-byte string, including null terminator, that contains an ASCII value which
represents the keypad microprocessor version in the system. The format of the string is x.xx with a terminating null
character.
S VN_CLASS_ASIC Returns a five-byte string, including null terminator, that contains an ASCII value which
represents the version of the FPGA firmware in the system. The format of the string is x.xx with a terminating null
character.
S VN_CLASS_BOOTSTRAP Returns a five-byte string, including null terminator, that contains an ASCII value
which represents the version of the Bootstrap Loader firmware in the system. The format of the string is x.xx with a
terminating null character.
ITC_NVPARM_INTERMEC_SOFTWARE_CONTENT
This IOCTL reads the manufacturing flag bits from the non-volatile data store that dictates certain software
parameters. A BOOLEAN DWORD is returned in the buffer pointed to by lpOutBuffer that indicates if Intermec
Content is enabled in the XIP regions. TRUE indicates that it is enabled. FALSE indicates that it is not enabled.
ITC_NVPARM_RTC_RESTORE
This IOCTL reads the state of the real-time clock restore flag. A BOOLEAN DWORD is returned in the buffer
pointed to by lpOutBuffer. TRUE indicates that the RTC is restored upon a cold boot. FALSE indicates that the
RTC is not restored.
ITC_NVPARM_INTERMEC_DATACOLLECTION_SW
This IOCTL reads the state of the data collection software enabled flag. A BOOLEAN DWORD is returned in the
buffer pointer to by lpOutBuffer that indicates the data collection software is to install at boot time. FALSE indicates
the data collection software should not install.
ITC_NVPARM_INTERMEC_DATACOLLECTION_HW
This IOCTL reads the data collection hardware flags. A BYTE is returned in the buffer pointer to by lpOutBuffer
that indicates the type of data collection hardware installed. The maximum possible value returned is
ITC_DEVID_SCANHW_MAX.