User's Manual Part 1

Table Of Contents

Cet appareil est conforme à la Partie 15 des règlements du FCC et à la norme RSS-210 d’Industrie Canada.

Operation Warning: To comply with the FCC’s RF exposure requirements and minimize health

hazards:

• The user shall not touch the antenna of this device when the device is in use.

• The user shall ensure that the device is at least 20 cm (8 in) away from their body when the

transceiver is in use.

Changes or modifications not expressly approved by Intermec could void the user’s authority to

operate this equipment.

This device requires a radio license unless it is used totally inside a building. (The user must obtain this license.)

Cet appareil exige une license radio à moins d’être entièrement installé dans un bâtiment. (L’utilisateur doit obtenir

cette license.)

Agency Approvals

This device is UL Listed.

For MC45 (Wireless WAN, GSM/GPRS) Configuration

This device complies with Part 24 of the FCC Rules and with RSS-133 of Industry Canada.

Cet appareil est conforme à la Partie 24 des règlements du FCC et à la norme RSS-133 d’Industrie Canada.

Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to

ensure compliance to RF exposure requirements.

The user shall not touch the antenna while the transmitter is in use. Operation of the terminal while

the unit is in the hand provides the 5 cm (2 in) distance requirement for safe operation between the

antenna and the hand.

Agency Approvals: See user’s guide instructions for handling, charging, and replacing batteries.

Failure to follow those instructions can result in personal injury, fire, or battery explosion.

For SB555 (Wireless WAN, CDMA/1x) Configuration

This device complies with Parts 22 and 24 of the FCC Rules and with RSS-1383 of Industry Canada.