User's Manual Part 1

Pocket PC 2002—Chapter 2
71700 Series Color Mobile Computer User’s Manual
8 Enter the access phone number, and tap Next .
9 Select other desired options, and tap Finish .
10 In the Dialing Locations tab, specify your current location and phone
type (most phone lines are tone). These settings will apply to all connec-
tions you create.
To start the connection, start using one of the following programs. Your
700 Series Computer will automatically begin connecting. Once con-
nected, you can:
S Send and receive e-mail messages by using Inbox. Before you can use
Inbox, you need to provide the information it needs to communicate
with the e-mail server. For specific instructions, see “Connecting Directly
to an E-mail Server” on page 72.
S Visit Internet or intranet Web or WAP pages via Pocket Internet Explor-
er.
S Send and receive instant messages with MSN Messenger. For more in-
formation, see “MSN Messenger” on page 53.
S Synchronize. For more information, see ActiveSync Help on the desktop
computer.
Creating an Ethernet Connection to Work
1 You do not need to create a new connection on your 700 Series Com-
puter. Instead, you must purchase a dock to enable on-board Ethernet
or purchase a CompactFlash Ethernet card that is c ompatible with your
700 Series Computer.
2 Obtain the following information from your ISP:
S User name
S Password
S Domain name
3 Insert the Ethernet card into your 700 Series Computer. For instruc-
tions on inserting and using the Ethernet card, see the owner’ s manual.
S If using an on-board Ethernet, place your 700 Series Computer in a
dock, tap Start → Today, then look in the System Tray for the Ether-
net icon (shown left). If not there, then tap the antenna icon for the
NDISTRAY pop-up menu and select Built-in Ethernet from the
menu.