User's Manual Part 1

4
For Users Outside of the United States and Canada
Place this supplement in your manual.
For 700C-802.11b Configuration
The Intermec product you purchased transmits and receives data using a 2.4 GHz Direct Sequence Spread Spectrum
system.
Programming and configuration information for the transceivers is also provided in the host device documentation.
Please check the Intermec Web site for additional documentation at www.intermec.com.
Hereby, Intermec Technologies Corporation declares that this Model 700C-802.11b is in compliance with the
essential requirements and other relevant provisions of R&TTE Directive (1999/5/EC). This product has been
assessed to the following standards:
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.1.1 (2001-09)
• EN 60950:1992 (incl. Amdt. 1-4, 11)
• SP/DGPT/ATAS 23 (1995-02)
The original Declaration of Conformity is available on the Intermec Technologies Corporation Web site at
www.intermec.com.
This product transmits electromagnetic waves at 2.4 GHz frequency range. It has been tested and found compliant
with U.S. (OET Guide 65) and Canadian (RSS 102) RF exposure regulations. There are no regulations covering this
product type in the EU at this time.
The transmitter module’s output power is 89 mW. The products using this module are intended for business and
industrial environments. They should not be used in residential environments and by children.
This product is marked with this logo and uses radio frequency bands that are not harmonized
throughout the European Community.
The following table indicates the areas of intended use of the equipment and any known restrictions.
Country of Intended Use License
Yes No Required Restrictions Details
Austria X
Belgium X
Denmark X
Finland X
France X X Frequency operation restricted to 2446.5 MHz to 2483.5 MHz.
Germany X
Greece X
Ireland X
Italy X
Luxembourg X
The Netherlands X
Portugal X
Spain X
Sweden X
United Kingdom X