User's Manual Part 1

Installing Applications—Chapter 3
81700 Series Color Mobile Computer User’s Manual
4 Click Install to install the AUTORUN files onto the storage card.
5 Create a “\Cabfiles” folder on the storage card. Copy any CAB files that
are to be extracted on every startup into this folder.
6 In the “\2577” directory, add your custom AUTOUSER.DAT file. See
the Recovery Help for more information on how to set up an
AUTOUSER.DAT file.
7 If you are using the RegFlushKey() API, the application must use a spe-
cial API to make sure the registry is written to the appropriate card; or
you can use the Utilities control panel applet, as follows:
a From the 700 Series Computer, tap Start → Settings → the System
tab → the Utilities icon → the Registry Save tab.
b Ta p Enable Registry Storage , then tap either of the following:
S SD
To write the registry to the SecureDigital storage card.
S CF
To write the registry to the CompactFlash storage card.
c Tap ok to save your entry and exit the Utilities control panel applet.
Note: If you are using a SecureDigital storage card, you must change any
disk access from “Storage Card” to “SDMMC Disk.”
8 Remove the storage card from the desktop PC and install the card into
the 700 Series Color Computer.
9 Perform a cold-boot on the 700 Series Color Computer. F iles will
automatically install from the storage card upon reboot. Any calls to the
RegFlushKey() API will automatically write the registry to the
appropriate location.