User's Manual Part 1

Installing Applications—Chapter 3
79700 Series Color Mobile Computer User’s Manual
3 Create a subdirectory on the PCMCIA CompactFlash drive in which to
store your application.
4 Add the autorun system to the s torage card using the CEImager
application. See the Software Tools User’ s Manual for information about
CEImager.
5 Copy your application, data files, and all required DLLs and drivers to
the subdirectory created on the CompactFlash drive.
6 Add your application to the AUTOUSER.DAT file on the
“\Storage Card\2577” directory that contains the following statement,
where your directory is the directory on the CompactFlash storage card
where the application was installed, and yourapp.exe is the name of your
application. Finish the “RUN=” statement with a carriage return line-
feed combination. There may be multiple run statements in the file.
RUN=\<your directory>\<yourapp.exe>
7 Remove the CompactFlash drive from your desktop computer and rein-
stall it into the 700 Series Computer.
8 Warm-boot the 700 Series Computer to add these files to the Compact-
Flash storage card.
If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-
rect, then the task manager will launch and execute your program on start-
up.
Copying to a SecureDigital S torage Card
Do the same steps as for the CompactFlash storage Card, except replace
the “\Storage Card\2577” directory with the “\SDMMC Disk\2577” direc-
tory.
Updating the System Software
You can use the Recovery CD to reinstall or update the operating system
software on the 700 Series Color Computer. For more information, con-
tact your Intermec sales representative.