User's Manual Part 1
Pocket PC 2002—Chapter 2
71700 Series Color Mobile Computer User’s Manual
8 Enter the access phone number, and tap Next.
9 Select other desired options, and tap Finish.
10 In the Dialing Locations tab, specify your current location and phone
type (most phone lines are tone). These settings will apply to all connec-
tions you create.
To start the connection, start using one of the following programs. Your
700 Series Computer will automatically begin connecting. Once con-
nected, you can:
S Send and receive e-mail messages by using Inbox. Before you can use
Inbox, you need to provide the information it needs to communicate
with the e-mail server. For specific instructions, see “Connecting Directly
to an E-mail Server” on page 72.
S Visit Internet or intranet Web or WAP pages via Pocket Internet Explor-
er.
S Send and receive instant messages with MSN Messenger. For more in-
formation, see “MSN Messenger” on page 53.
S Synchronize. For more information, see ActiveSync Help on the desktop
computer.
Creating an Ethernet Connection to Work
1 You do not need to create a new connection on your 700 Series Com-
puter. Instead, you must purchase a dock to enable on-board Ethernet
or purchase a CompactFlash Ethernet card that is compatible with your
700 Series Computer.
2 Obtain the following information from your ISP:
S User name
S Password
S Domain name
3 Insert the Ethernet card into your 700 Series Computer. For instruc-
tions on inserting and using the Ethernet card, see the owner’ s manual.
S If using an on-board Ethernet, place your 700 Series Computer in a
dock, tap Start → Today, then look in the System Tray for the Ether-
net icon (shown left). If not there, then tap the antenna icon for the
NDISTRAY pop-up menu and select Built-in Ethernet from the
menu.